du=tftp 81a00000 user-x.cramfs.img; flwrite
dd=tftp 81a00000 data-x.cramfs.img; flwrite
dw=tftp 81a00000 web-x.cramfs.img; flwrite
dg=tftp 81a00000 gui-x.cramfs.img; flwrite
dk=tftp 81a00000 kernel-x.cramfs.img; flwrite
up=tftp 81a00000 update.img; flwrite
tk=tftp 80800000 uImage; bootm 80800000
gionum=22.25
gioval=1.1
dh_com=0
autosip=192.168.254.254
autolip=192.168.1.108
autogw=192.168.1.1
autonm=255.255.255.0
HWID=VTO2111D:0:4:1:1d:5:0:1:9:3:3:0:1B0:0:2:0:0:0:0:0
bootargs=console=ttyS0,115200n8 root=/dev/mtdblock4 rootfstype=cramfs,nolock mem=90M video=davincifb:vid0=OFF:vid1=OFF:osd0=OFF:osd1=OFF
filesize=C848A8
fileaddr=81A00000
ID=3E05E28PAN00160
wifiaddr=3C:EF:8C:42:84:45
ethaddr=3C:EF:8C:42:7D:A0
dh_keyboard=0
appauto=0
stdin=serial
stdout=serial
stderr=serial
ver=U-Boot 1.3.6 (jerry) (Jun 15 2016 - 18:12:41)

Environment size: 1176/16380 bytes
DHBOOT# run dr
TFTP from server 192.168.1.1; our IP address is 192.168.1.108
Filename 'romfs-x.cramfs.img'.
Load address: 0x81a00000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################
done
Bytes transferred = 2912320 (2c7040 hex)

## Checking Image at 0x81a00000 ...
   Header CRC Checking ... OK
   Image Name:   romfs
   Image Type:   ARM Linux Kernel Image (gzip compressed)
   Data Size:    2912256 Bytes =  2.8 MB
   Load Address: 023e0000
   Entry Point:  026e0000
   Data CRC Checking ... OK
Programing start at: 0x003e0000
write : 100%
done
DHBOOT# run dk
TFTP from server 192.168.1.1; our IP address is 192.168.1.108
Filename 'kernel-x.cramfs.img'.
Load address: 0x81a00000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ###########################
done
Bytes transferred = 1798552 (1b7198 hex)

## Checking Image at 0x81a00000 ...
   Header CRC Checking ... OK
   Image Name:   linux
   Image Type:   ARM Linux Kernel Image (gzip compressed)
   Data Size:    1798488 Bytes =  1.7 MB
   Load Address: 02060000
   Entry Point:  02260000
   Data CRC Checking ... OK
Programing start at: 0x00060000
write : 100%
done
DHBOOT# run du
TFTP from server 192.168.1.1; our IP address is 192.168.1.108
Filename 'user-x.cramfs.img'.
Load address: 0x81a00000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ####################################
done
Bytes transferred = 6836288 (685040 hex)

## Checking Image at 0x81a00000 ...
   Header CRC Checking ... OK
   Image Name:   user
   Image Type:   ARM Linux Kernel Image (gzip compressed)
   Data Size:    6836224 Bytes =  6.5 MB
   Load Address: 026f0000
   Entry Point:  02da0000
   Data CRC Checking ... OK
Programing start at: 0x006f0000
write : 100%
done
DHBOOT# run dw
TFTP from server 192.168.1.1; our IP address is 192.168.1.108
Filename 'web-x.cramfs.img'.
Load address: 0x81a00000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         ###################################
done
Bytes transferred = 1507392 (170040 hex)

## Checking Image at 0x81a00000 ...
   Header CRC Checking ... OK
   Image Name:   web
   Image Type:   ARM Linux Standalone Program (gzip compressed)
   Data Size:    1507328 Bytes =  1.4 MB
   Load Address: 02260000
   Entry Point:  023e0000
   Data CRC Checking ... OK
Programing start at: 0x00260000
write : 100%
done
DHBOOT# run dp
## Error: "dp" not defined
DHBOOT# run dr
TFTP from server 192.168.1.1; our IP address is 192.168.1.108
Filename 'romfs-x.cramfs.img'.
Load address: 0x81a00000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################
done
Bytes transferred = 2912320 (2c7040 hex)

## Checking Image at 0x81a00000 ...
   Header CRC Checking ... OK
   Image Name:   romfs
   Image Type:   ARM Linux Kernel Image (gzip compressed)
   Data Size:    2912256 Bytes =  2.8 MB
   Load Address: 023e0000
   Entry Point:  026e0000
   Data CRC Checking ... OK
Programing start at: 0x003e0000
write : 100%
done
DHBOOT# run dc
TFTP from server 192.168.1.1; our IP address is 192.168.1.108
Filename 'custom-x.cramfs.img'.
Load address: 0x81a00000
Loading: *
TFTP error: 'File notc?#;lc@4xxxxxxxxxaRPar,&_vsACv_xxxxxxxxxxxxxaRPar,&_vsACiPV}*lb.
 ?e_&1S~#H2$? (1)
Not retrying...

## Checking Image at 0x81a00000 ...
   Header CRC Checking ... OK
   Image Name:   romfs
   Image Type:   ARM Linux Kernel Image (gzip compressed)
   Data Size:    2912256 Bytes =  2.8 MB
   Load Address: 023e0000
   Entry Point:  026e0000
   Data CRC Checking ... OK
Programing start at: 0x003e0000
write : 100%
done
DHBOOT# restart
Unknown command 'restart' - try 'help'
DHBOOT# resethecking DDR......OK

UBL Version: 1.46t(DM365)18:02:25 Jun 15 2016
 Oscillator: 24MHZ
 ARM Rate: 432 MHZ
 DDR Rate: 340 MHZ
 BootMode: SPI 
Starting SPI Memory Copy...
DONE


U-Boot 1.3.6 (jerry) (Jun 15 2016 - 18:12:41)

DRAM:  128 MB
SF: Got idcode c2 20 18 c2 20
In:    serial
Out:   serial
Err:   serial
Ethernet PHY: GENERIC @ 0x01,id:1cc816
total gio 2
gio[22]=1
gio[25]=1
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'upgrade_info_7db780a713a4.txt'.
Load address: 0x80100000
Loading: *
Retry count exceeded; starting again
Fail to get info file!
Init error!
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'failed.txt'.
Load address: 0x80200000
Loading: *
Retry count exceeded; starting again
==>use default images
can't find uImage
Fail: can't get cramfs super block. 
DHBOOT# 

Checking DDR......OK

UBL Version: 1.46t(DM365)18:02:25 Jun 15 2016
 Oscillator: 24MHZ
 ARM Rate: 432 MHZ
 DDR Rate: 340 MHZ
 BootMode: SPI 
Starting SPI Memory Copy...
DONE


U-Boot 1.3.6 (jerry) (Jun 15 2016 - 18:12:41)

DRAM:  128 MB
SF: Got idcode c2 20 18 c2 20
In:    serial
Out:   serial
Err:   serial
Ethernet PHY: GENERIC @ 0x01,id:1cc816
total gio 2
gio[22]=1
gio[25]=1
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'upgrade_info_7db780a713a4.txt'.
Load address: 0x80100000
Loading: *
Retry count exceeded; starting again
Fail to get info file!
Init error!
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'failed.txt'.
Load address: 0x80200000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
==>use default images
can't find uImage
Fail: can't get cramfs super block. 
DHBOOT# 



































Unable to open serial port \\.\COM3:
  The system cannot find the file specified.


































Checking DDR......OK

UBL Version: 1.46t(DM365)18:02:25 Jun 15 2016
 Oscillator: 24MHZ
 ARM Rate: 432 MHZ
 DDR Rate: 340 MHZ
 BootMode: SPI 
Starting SPI Memory Copy...
DONE


U-Boot 1.3.6 (jerry) (Jun 15 2016 - 18:12:41)

DRAM:  128 MB
SF: Got idcode c2 20 18 c2 20
In:    serial
Out:   serial
Err:   serial
Ethernet PHY: GENERIC @ 0x01,id:1cc816
total gio 2
gio[22]=1
gio[25]=1
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'upgrade_info_7db780a713a4.txt'.
Load address: 0x80100000
Loading: *
Retry count exceeded; starting again
Fail to get info file!
Init error!
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'failed.txt'.
Load address: 0x80200000
Loading: *
Retry count exceeded; starting again
==>use default images
can't find uImage
Fail: can't get cramfs super block. 
DHBOOT# 

Checking DDR......OK

UBL Version: 1.46t(DM365)18:02:25 Jun 15 2016
 Oscillator: 24MHZ
 ARM Rate: 432 MHZ
 DDR Rate: 340 MHZ
 BootMode: SPI 
Starting SPI Memory Copy...
DONE


U-Boot 1.3.6 (jerry) (Jun 15 2016 - 18:12:41)

DRAM:  128 MB
SF: Got idcode c2 20 18 c2 20
In:    serial
Out:   serial
Err:   serial
Ethernet PHY: GENERIC @ 0x01,id:1cc816
total gio 2
gio[22]=1
gio[25]=1
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'upgrade_info_7db780a713a4.txt'.
Load address: 0x80100000
Loading: *
Retry count exceeded; starting again
Fail to get info file!
Init error!
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'failed.txt'.
Load address: 0x80200000
Loading: *
Retry count exceeded; starting again
==>use default images
can't find uImage
Fail: can't get cramfs super block. 
DHBOOT# help
?       - alias for 'help'
askenv  - get environment variables from stdin
autoscr - run script from memory
base     - print or set address offset
boot    - boot default, i.e., run 'bootcmd'
bootd   - boot default, i.e., run 'bootcmd'
bootm   - boot application image from memory
bootp   - boot image via network using BootP/TFTP protocol
cmp      - memory compare
coninfo - print console devices and information
cp       - memory copy
cpll            - chang PLL multiplier
crc32    - checksum calculation
dhcp    - invoke DHCP client to obtain IP/boot params
echo    - echo args to console
erase   - erase FLASH memory
flinfo  - print FLASH memory information
flwrite - write data into FLASH memory
fsload  - load binary file from a filesystem image
gpio init               - set gionum to gioval
go      - start application at address 'addr'
help    - print online help
flwrite - write hwid into FLASH memory
id      - set product id and save to flash
iminfo  - print header information for application image
imxtract- extract a part of a multi-image
itest   - return true/false on integer compare
kload  - load uImage file from flash
lip      - set local ip address but not save to flash
loadb   - load binary file over serial line (kermit mode)
loads   - load S-Record file over serial line
loady   - load binary file over serial line (ymodem mode)
loop     - infinite loop on address range
mac      - set mac address and save to flash
md       - memory display
meminit         - memset 0xcc
memsize         - set mem size
mii     - MII utility commands
mm       - memory modify (auto-incrementing)
mtest    - simple RAM test
mw       - memory write (fill)
nfs     - boot image via network using NFS protocol
nm       - memory modify (constant address)
ping    - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
protect - enable or disable FLASH write protection
rarpboot- boot image via network using RARP/TFTP protocol
recover default env
reset   - Perform RESET of the CPU
run     - run commands in an environment variable
saveenv - save environment variables to persistent storage
saves   - save S-Record file over serial line
setenv  - set environment variables
sf      - SPI flash sub-system
sip      - set server ip address but not save to flash
sleep   - delay execution for some time
tftpboot- boot image via network using TFTP protocol
version - print monitor version
DHBOOT# version

U-Boot 1.3.6 (jerry) (Jun 15 2016 - 18:12:41)
DHBOOT# printenv
bootcmd=fsload
bootdelay=3
baudrate=115200
eth1addr=00:01:5b:00:55:66
eth2addr=00:01:5b:00:77:88
ipaddr=192.168.1.108
serverip=192.168.1.1
netmask=255.255.255.0
bootfile="uImage"
single=0
da=protect off all;tftp 81a00000 dm365_ubl_boot_16M.bin.img;flwrite
dc=tftp 81a00000 custom-x.cramfs.img; flwrite
dr=tftp 81a00000 romfs-x.cramfs.img; flwrite
du=tftp 81a00000 user-x.cramfs.img; flwrite
dd=tftp 81a00000 data-x.cramfs.img; flwrite
dw=tftp 81a00000 web-x.cramfs.img; flwrite
dg=tftp 81a00000 gui-x.cramfs.img; flwrite
dk=tftp 81a00000 kernel-x.cramfs.img; flwrite
up=tftp 81a00000 update.img; flwrite
tk=tftp 80800000 uImage; bootm 80800000
gionum=22.25
gioval=1.1
dh_com=0
autosip=192.168.254.254
autolip=192.168.1.108
autogw=192.168.1.1
autonm=255.255.255.0
HWID=VTO2111D:0:4:1:1d:5:0:1:9:3:3:0:1B0:0:2:0:0:0:0:0
bootargs=console=ttyS0,115200n8 root=/dev/mtdblock4 rootfstype=cramfs,nolock mem=90M video=davincifb:vid0=OFF:vid1=OFF:osd0=OFF:osd1=OFF
filesize=C848A8
fileaddr=81A00000
ID=3E05E28PAN00160
wifiaddr=3C:EF:8C:42:84:45
ethaddr=3C:EF:8C:42:7D:A0
dh_keyboard=0
appauto=0
stdin=serial
stdout=serial
stderr=serial
ver=U-Boot 1.3.6 (jerry) (Jun 15 2016 - 18:12:41)

Environment size: 1176/16380 bytes
DHBOOT# 